This is superior quality, hard wearing, cotton backed Duchess Satin has a soft and delicate sheen.  Strong enough to make a single layer corset, it can also be used with lining to make a double layer corset.

Priced by the meter.  Black or white.

Please indicate which colour you would like from the options below. 

If you require less than one meter, please email using the contact form.

This good quality fast dyed polycotton fabric is suitable to use as lining for a double layered corset.

Composition is 65%/35% polyester cotton and it is 115cm wide.

Priced per metre in black or white.  Minimum order is 1m.

Please indicate which colour you would like from the options below. 

This heavyweight natural coloured calico is just the right weight to make a good sturdy toile which will give you a good idea of how the finished corset will look.

100% Cotton.

Priced by the metre, minimum order is 1m.

These British made steel busks are coated in white plastic, have rounded dipped ends, and silver coloured clasps.

10", 12", 13" and 14" lengths available.

Priced per the options in the drop down box below.

Flat steels for boning near eyelets at the back of the corset.  Coated with white plastic with rounded sealed ends. 

One size only, 11.5"

Flat steel bones for straight bone channels.  British made, coated in white plastic with rounded sealed ends.

Various lengths from 5 inches to 9.5 inches long.

Priced per the options in the drop down box below.

Flat steel bones for straight bone channels.  British made, coated in white plastic with rounded sealed ends.

Various lengths from 10 inches to 14 inches long.

Priced per the options in the drop down box below.

Continuous spiral steel boning, 7mm width, for curvy or straight bone channels.  This is an economical way to bone the entire corset.  Many "off the shelf" corsets only use spiral bones as they are strong and yet more flexible than straight bones. 

You will need a pair of household wire cutters to use this, and a pair of pliers for applying the end caps.

Steel is priced per metre.  End caps are priced per pack of 10.

Please choose from the options below.

A strong, quite thick, herringbone tape available in black or white.

Used for sewing boning channels in single layer corsets.

Priced per metre.  100% cotton. 13mm wide

Please indicate which colour you would like from the options below.

A very strong Petersham tape available in black or white.  Used for re-enforcing the waistline of your corset (on the inside), or for making wider boning channels (ie: for the 12mm bones).

Priced per metre.  100% polyester.  25mm wide.

Please indicate which colour you would like from the options below. 

Shiny acetate satin binding to finish off the tops and bottoms of corsets.  Available in Red, White or Black.

100% polyester.  19mm wide.

Please indicate which colour you would like from the options below. 

5mm eyelets in three colours.  All come in a set with the tool required to punch the two pieces together - all you need is a hammer!

Black, silver or gold.

Please indicate which colour you would like from the options below. 

Continuous woven lacing cord, cotton viscose mix. 

Because the correct way to lace corsets entails tying them at the bottom, I do not supply aglets or sealed ends.

Priced per metre in black or white.  Please indicate which colour you would like from the options below.